Open distributors up to 520kW
Open distributors with pump groups up to 520KW
The choice of open distributor / equilibrium cylinder with pump groups depends on the capacity (kW) required in your heating system.
Hydraulic Separator / Balance Bottle CPN100 DN32 11/4"
80 kW
607001 Hydraulic Separator CPN100-DN32 with insulation including wall brackets
Technical data: Material: Max Working pressure: Max Temperature: Max Flow: Connection: Immersion tube
Staal ST 37.1
8 bar
110°C
4,5 m³/h
1 1/4"
1/2"
8 bar
110°C
4,5 m³/h
1 1/4"
1/2"
TBN101 optional: Open distributor connection set with hydraulic separator.
Zone Manifold C100 DN32
The C100-DN 32 is a 2-chamber distributor with 2,3,4,5 or 6 pump group connections. This distributor is equipped with a DN20 connection on the return for connecting a pressure vessel and a connection for a safety group. The manifold is provided with insulation.
To connect the Manifold to the CPN100-32 equilibrium cylinder, one of the connecting pieces below is required!!
607016
607017
607017
80 KW
607011 Zone Manifold central heating C 100 2F - DN 32 607012 Zone Manifold central heating C 100 3F - DN 32 607013 Zone Manifold central heating C 100 4F - DN 32 607014 Zone Manifold central heating C 100 5F - DN 32 607015 Zone Manifold central heating C 100 6F - DN 32 607016 Connecting piece DN32 (11/4"x2") with brass nut607018 Connecting piece DN32 (11/4"x2") with brass nut and check valve for SMT group607017 Connecting piece DN32 (11/4"x2") with brass nut and valve 606015 Wall bracket Delta for C 100607040 Floor bracket for C 2 100-DN32607023 Reducing piece DN 25 for Manifold C100 DN 32 and C 2 100 DN32
Technical data: Material: Max Working pressure: Max Temperature: Length Center to End: Connection: Number of chambers:
Staal ST 37.1
8 bar
110°C
125mm
1 1/4" M
2
8 bar
110°C
125mm
1 1/4" M
2
Hydraulic Separator / Balance Bottle CPN100 DN40 11/2"
120 kW
607002 Hydraulic Separator with insulation CPN100-DN40 incl. floor bracket The CPN100-DN40 is equipped with insulation and at the top 2 connections for thermometer and air vent (1/2") and at the bottom a connection for the filling tap and a 2" internal thread connection. This set includes: an automatic air vent (3/8") with a check valve 1/2" and 4 x 11/2" fittings.
Technical data: Material: Max Working pressure: Max Temperature: Max Flow: Connection: Immersion tube
Staal ST 37.1
8 bar
110°C
6,5 m³/h
1 1/2"
1/2"
8 bar
110°C
6,5 m³/h
1 1/2"
1/2"
TBN100 optional Connection set of Hydraulic separator and CPN100-DN40
Zone Manifold C100 DN32
The C100-DN 32 is a 2-chamber distributor with 2,3,4,5 or 6 pump group connections. This distributor is equipped with a DN20 connection on the return for connecting a pressure vessel and a connection for a safety group. The manifold is provided with insulation.
To connect the Manifold to the CPN100-32 equilibrium cylinder, one of the connecting pieces below is required!!
607016
607017
607017
120 KW
607011 Zone Manifold central heating C 100 2F - DN 32 607012 Zone Manifold central heating C 100 3F - DN 32 607013 Zone Manifold central heating C 100 4F - DN 32 607014 Zone Manifold central heating C 100 5F - DN 32 607015 Zone Manifold central heating C 100 6F - DN 32 607016 Connecting piece DN32 (11/4"x2") with brass nut607018 Connecting piece DN32 (11/4"x2") with nut and check valve for SMT group607017 Connecting piece DN32 (11/4"x2") with brass nut and valve606015 Wall bracket Delta for C 100607040 Floor bracket for C 2 100-DN32607023 Reducing piece DN 25 for Manifold C100 DN 32 and C 2 100 DN32
Technical data: Material: Max Working pressure: Max Temperature: Length Center to End: Connection: Number of chambers
Staal ST 37.1
8 bar
110°C
125mm
1 1/4" M
2
8 bar
110°C
125mm
1 1/4" M
2
220 KW
Hydraulic Separator / Balance Bottle CPN 120DN50
Max 220 kW
609001 Hydraulic Separator CPN 120- DN 50 The CPN120-DN50 is equipped with insulation and 2 connections at the top for thermometer and air vent (1/2") and at the bottom a connection for the filling tap and a 2" male thread connection. This set includes: an automatic air vent (3/8") with a check valve 1/2" and 4 x 11/2" fittings.609005 Connection set TBN 120-DN50 for connection C2-100 DN32 with CPN 120 DN50
Technical data: Material: Max Working pressure: Max Temperature: Max Flow: Connection: Immersion tube:
Staal ST 37.1
8 bar
110°C
9,5 m³/h
2"
1/2"
8 bar
110°C
9,5 m³/h
2"
1/2"
Zone Manifold C2-100 DN32
The C2 100-DN 32 is a 2-chamber distributor with 2,3,4,5 or 6 pump group connections. This 2-part distributor is equipped with 2 thermometers and 2 connections for 1/2" filling tap. The manifold is equipped with insulation.
To connect the Manifold to the CPN100-32 equilibrium cylinder, one of the connecting pieces below is required!!
607016
607017
607017
220 KW
607011 Zone Manifold central heating C 100 2F - DN 32 607012 Zone Manifold central heating C 100 3F - DN 32 607013 Zone Manifold central heating C 100 4F - DN 32 607014 Zone Manifold central heating C 100 5F - DN 32607015 Zone Manifold central heating C 100 6F - DN 32 607016 Connecting piece DN32 (11/4"x2") with brass nut607018 Connecting piece DN32 (11/4"x2") with brass nut and check valve for SMT group607017 Connecting piece DN32 (11/4"x2") with brass nut and valve606015 Wall bracket Delta for C 100607040 Floor bracket for C 2 100-DN32607023 Reducing piece DN 25 for Manifold C100 DN 32 and C 2 100 DN32
Technical data: Material: Max Working pressure: Max Temperature: Length Center to End: Connection: Number of chambers
Steel ST 37.1 8 bar 110°C 125mm 1 1/4" external thread 2
Pompgroep SA 125 DN32 11/4"
The pump group SA125 DN32 11/4" is equipped with: Equipped with: 3 ball valves, 2 of which with thermometers (for supply and return) with non-return valve built into the return Insulation
Feed is standard right, but can be changed.
607051 Pump group SA 125 - DN 32 (11/4") without pump 607055Pump group SA 125 - DN 32 (1 ¼") with pump Grundfos Alpha 1L 32 - 60
Technical data: Max Working pressure: Max Temperature: Center to center: Boiler connection: Installation side: Pump installation length: Pump connection:
8 bar 110°C 125mm 2" External thread 11/4" Internal thread 180mm 2" External thread
Pompgroep
SMT 125 DN25 1"
SMT 125 DN25 1"
The pump group SMT125 DN25 1" is equipped with: 2 ball valves with thermometers (for supply and return) return with built-in non-return valve, Insulation 1 mix valve MT 25 Brass with by-pass Optional: Actuator MP10
Feed is standard right, but can be changed.
The pump group SMT125 DN32 11/4" is equipped with: 2 ball valves with thermometers (for supply and return) with non-return valve built into the return Insulation 1 mixing valve MT 25 Brass with by-pass Optional: Actuator MP10
607061 Pump group SMT 125 - DN 32 (1 ¼") without pump 607065Pump group SMT 125 - DN 32 (1 ¼") with pump Grundfos Alpha 1L 32 - 60607168 Pump group SMT 125 - DN 32 (1 1/4") with pump Wilo Yonos Para 30/6607169 Pump group SMT 125 - DN 32 (1 1/4”) with pump Wilo Yonos Para 30/8
Technical data: Max Working pressure: Max Temperature: Center to center: Boiler connection: Installation side: Pump installation length: Pump connection:
8 bar 110°C 125mm 2" External thread 11/4" Internal thread 180mm 2" External thread
Options for system DN32
606015 Wall bracket Delta for manifold C60, C70 and C 100
607040 Floor bracket for C 2 100-DN32
401011
Actuator MP 10
Actuator MP 10
606022 safety group 3 Bar 11/4" UNI X MAGNUM 200KW
606027 Connecting piece L90 for UNI X Magnum with central heating manifold c100, C2 100
606026 Connecting piece S for barrel with C60.70 DN25
606005 TBN 70 /2 for connection C60 or C70 - 2F - DN 25 with CPN70 DN 25606006TBN 70 /3 for connection C60 or C70 - 3F - DN 25 with CPN70 DN 25606007 TBN 70 /4 for connection C60 or C70 - 4F - DN 25 with CPN70 DN 25606008 TBN 70 / 5 for connection C 70 - 4F - DN 25 with CPN70 DN 25 617005 TBN101 / 2 for connection CPN100 DN32 with C100 - 2F - DN 25617006 TBN101 / 3 for connection CPN100 DN32 with C10 0 - 3F - DN 25617007 TBN101 / 4 for connection CPN100 DN32 with C100 - 4F - DN 25617008 TBN101 / 5 for connection CPN100 DN32 with C100 - 5F - DN 25617009 TBN101 / 6 for connection CPN100 DN32 with C100 - 6F - DN 25 5 TBN100 / 2 for connection CPN100 DN40 with C100 - 2F - DN 25607006 TBN100 / 3 for connection CPN100 DN40 with C100 - 3F - DN 25607007 TBN100 / 4 for connection CPN100 DN40 with C100 - 4F - DN 25607008 TBN100 / 5 for connection CPN100 DN40 with C100 - 5F - DN 25607009 TBN100 / 6 for connection CPN100 DN40 with C100 - 6F - DN 25
Technical data: Power consumption: Connection cable: Rotation angle: Noise: Protection class: Temperature range: Weight:
3,5W - 3,5VA
3x0,75mm2 lengte 2mtr
90°
Max 35dB
IP40
0-50°C
350 gram
3x0,75mm2 lengte 2mtr
90°
Max 35dB
IP40
0-50°C
350 gram
401010
401011
401012
401041
401031
401011
401012
401041
401031
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 15 met adapter A101- 15Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 15 met adapter A101- 15Nm
Opening
70s /90°
140s /90°
140s /90°
140s /90°
140s /90°
70s /90°
140s /90°
140s /90°
140s /90°
140s /90°
Voltage
230V-50Hz
230V-50Hz
24V-50Hz
24V-50Hz
230V-50Hz
230V-50Hz
230V-50Hz
24V-50Hz
24V-50Hz
230V-50Hz
Hydraulic Separator / Balance Bottle CPN 120DN65
Max 350 kW
609002 Hydraulic Separator CPN 120 DN65 21/2" The CPN120-DN65 is equipped with insulation and at the top 2 connections for thermometer and air vent (1/2") and at the bottom a connection for the filling tap and a 2" external thread connection. This set includes: an automatic air vent (3/8") with a check valve 1/2" and 4 x 21/2" fittings and a floor bracket.609006Connection set TBN 120-DN65 for connection C2-100 DN50 with CPN 120 DN65
Technical data: Material: Max Working pressure: Max Temperature: Max Flow: Connection: Immersion tube:
Staal ST 37.1
8 bar
110°C
18 m³/h
21/2"
1/2"
8 bar
110°C
18 m³/h
21/2"
1/2"
Zone Manifold C2-120 DN50
The C2 120-DN 50 is a 2-chamber distributor with 2,3,4,5 or 6 pump group connections. This 2-part distributor is equipped with 2 thermometers and 2 connections for a 1/2" filling tap. The manifold is equipped with insulation.
350 KW
609011 Zone Manifold central heating C2 120 2F - DN 50 with Insulation609012 Zone Manifold central heating C2 120 3F - DN 50 with Insulation607040 Floor brackets 1 set=2 pieces
Technical data: Material: Max Working pressure: Max Temperature: Length Center to End: Connection: Number of chambers
Steel ST 37.1 6 bar 110°C 250mm 2" male thread 2
Hydraulic Separator/Balance Bottle CPN 250, CPN 300
609101
609102
609103
609104
609102
609103
609104
CPN 250 - DN 65
CPN 250 - DN 80
CPN 300 - DN 100
CPN 300 - DN 125
CPN 250 - DN 80
CPN 300 - DN 100
CPN 300 - DN 125
Max 520 kW
The CPN250 300 is equipped with insulation and 2 connections for a thermometer and an air vent (1/2") at the top and a 1" connection at the bottom. with insulation
Technical data: Material: Max Working pressure: Max Temperature: Flow:
Staal ST 37.1
8 bar
110°C
9-30 m³/h
8 bar
110°C
9-30 m³/h
Power Delta T 15°C 155 210 350 520
Flow m3/h Liter
9 2612 2620 6130 62
9 2612 2620 6130 62
Zone Manifold C2-125
C2-150
C2-150
609121
609122
609123
609124
609125
609126
609127
609128
607040
609122
609123
609124
609125
609126
609127
609128
607040
C2 125 2 F – DN 65 2 circuits
C2 125 2 F – DN 65 3 circuits
C2 125 2 F – DN 80 2 circuits
C2 125 2 F – DN 80 3 circuits
C2 150 2 F – DN 100 2 circuits
C2 150 2 F – DN 100 3 circuits
C2 150 2 F – DN 125 2 circuits
C2 150 2 F – DN 125 3 circuits
Vloerbeugels 1 set = 2 stuks
C2 125 2 F – DN 65 3 circuits
C2 125 2 F – DN 80 2 circuits
C2 125 2 F – DN 80 3 circuits
C2 150 2 F – DN 100 2 circuits
C2 150 2 F – DN 100 3 circuits
C2 150 2 F – DN 125 2 circuits
C2 150 2 F – DN 125 3 circuits
Vloerbeugels 1 set = 2 stuks
520 KW
The C2 125-150 is a 2-room distributor with 2 or 3 zones. This 2-part distributor can be installed with the pump groups DN25, 32, 40 and 50. The distributor is equipped with 2 thermometers and 2x 1/2" connections. The manifold is equipped with insulation.
Technical data: Material: Max Working pressure: Max Temperature: Power:
Steel ST 37.1 6 bar 110°C 155-350 kW at ∆T 20°C
Power ∆T 15°C 155 155 210 210 350 350 520 520
Flow m3/h
9
9
12
12
20
20
30
30
9
9
12
12
20
20
30
30
Pump group D-SA250 DN25 Equipped with: 3 ball valves, 2 with thermometers (for supply and return) 1 with built-in check valve Insulation
609051 D-SA 250 – DN 25 (1”) without pump 609053D-SA 250 – DN 25 (1”) with pump Grundfos UPM3 Auto L 25-71609054 D-SA 250 – DN 25 (1”) with pump Wilo Yonos Para 25/6609055 D-SA 250 – DN 25 (1”) with pump Wilo Yonos Para 25/8
Pump group D-SA250 DN32 Equipped with: 3 ball valves, 2 with thermometers (for supply and return) 1 with built-in check valve Insulation
619051 D-SA 250 – DN 32 (1 1/4”) without pump 619053 D-SA 250 – DN 32 (1 1/4”) with pump Grundfos Alpha 1L 32-61 619054 D-SA 250 – DN 320 (1 1/4”) pump meter Wilo Yonos Para 30/6 619055 D-SA 250 – DN 32 (1 1/4”) pump meter Wilo Yonos Para 30/8
699001 Connection piece DN50 (flange) x 1” (Nut 1 1/2”) 699002 Connection piece DN50 (flange) x 1” (Nut 1 1/2”) & check valve699003 Connection piece DN50 (flange) x 1 1/4” (Nut 2 ") 699004 Connection piece DN50 (flange) x 1 1/4" (Nut G 2") & check valve
Pump group D-SMT 250 DN25, DN32 Equipped with: 3 ball valves, 2 of which with thermometers (for supply and return) 1 with built-in check valve Insulation With Mixing valve Optional: Actuator MP10
649051 D-SMT 250 – DN 25 (1”) without pump 649053 D-SMT 250 – DN 25 (1”) with pump Grundfos UPM3 Auto L 25-70649054 D-SMT 250 – DN 25 (1”) with pump Wilo Yonos Para 25/6649055 D-SMT 250 – DN 25 (1”) with pump Wilo Yonos Para 25/8
659051 D-SMT 250 – DN 32 (1 1/4”) without pump 659053 D-SMT 250 – DN 32 (1 1/4”) with pump Grundfos Alpha 1L 32-60 659054 D-SMT 250 – DN 32 (1 1/4”) with pump Wilo Yonos Para 30/6 659055 D-SMT 250 – DN 32 (1 1/4”) with pump Wilo Yonos Para 30/8
699001 Connection piece DN50 (flange) x 1” (Nut 1 1/2”) 699002 Connection piece DN50 (flange) x 1” (Nut 1 1/2”) & check valve699003 Connection piece DN50 (flange) x 1 1/4” (Nut 2 ") 699004 Connection piece DN50 (flange) x 1 1/4" (Nut G 2") & check valve
Pump group D-SA250 DN40, DN50 Equipped with: 3 ball valves, 2 of which with thermometers (for supply and return) Insulation
629052 D-SA 250–DN 40(1 1/2”) without pump, pump installation length 250 mm639052D-SA 250–DN 50(2”) without pump, pump installation length 280 mm
Technical data: Max Working pressure: Max Temperature: Center to center: Boiler side: Installation side DN40: Installation side DN50:
6 bar
110°C
250mm
DN 50 Flens
11/2" M
2" M
110°C
250mm
DN 50 Flens
11/2" M
2" M
Pump group D-SMT250 DN40, DN50 Equipped with: 3 ball valves, 2 of which with thermometers (for supply and return) Insulation With mixing valve Optional: Actuator MP10
669052 D-SMT 250 – DN 40 (1 1/2”) without pump, pump installation length 250 mm679052D-SMT 250 – DN 50 (2”) without pump, pump installation length 280 mm
Technical data: Max Working pressure: Max Temperature: Center to center: Boiler side: Installation side DN40: Installation side DN50:
6 bar 110°C 250mm DN 50 Flange 11/2" Male thread 2" Male thread
Options for system 520 kW
699001 Connection piece DN 50 (flange) x 1” (Nut 1 1/2”) 699002 Connection piece DN 50 (flange) x 1” (Nut 1 1/2”) with non-return valve 699003 Connection piece DN 50 (flange) x 1 1/4 ” (Nut 2”) 699004 Connection piece DN 50 (flange) x 1 1/4” (Nut G 2”) with non-return valve
699011 Angled flange connection 90° - DN 65 699012 Angled flange connection 90° - DN 80 699013 Angled flange connection 90° - DN 100 699014 Angled flange connection 90° - DN 125
607040 Floor bracket for C 2 100-DN32
401011
Actuator MP 10
Actuator MP 10
Technical data: Power consumption: Connection cable: Rotation angle: Noise: Protection class: Temperature range: Weight:
3,5W - 3,5VA
3x0,75mm2 lengte 2mtr
90°
Max 35dB
IP40
0-50°C
350 gram
3x0,75mm2 lengte 2mtr
90°
Max 35dB
IP40
0-50°C
350 gram
401010
401011
401012
401041
401031
401011
401012
401041
401031
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 15 met adapter A101- 15Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 10 met adapter A101- 10Nm
Actuator MP 15 met adapter A101- 15Nm
Opening
70s /90°
140s /90°
140s /90°
140s /90°
140s /90°
70s /90°
140s /90°
140s /90°
140s /90°
140s /90°
Voltage
230V-50Hz
230V-50Hz
24V-50Hz
24V-50Hz
230V-50Hz
230V-50Hz
230V-50Hz
24V-50Hz
24V-50Hz
230V-50Hz