Modular System
The distributor can be configured according to any desired construction, up to a maximum of 15 groups with a few clicks. With the choice of a ¾" Euroconus connection or a push-in coupling.
The divider can be mounted horizontally or vertically and has a depth of 80mm.
Possible Connections
There are 3 types of push-in couplings and a ¾" brass Euroconus connection available for connecting the pipes to the distributor.
With the push-in connections, a lot of time can be saved due to faster installation. And time is money.
Euroconus connection with clip
MODEC ¾" Euroconus connection
Push-in for plastic pipe:
MODPM16-16mm
MODPM18-18mm
MODPM20-20mm
MODPM25-25mm
Push-in for Multilayer tube:
MODPM16M-16mm
MODPM20-20mm
MODPM25-25mm
This connection is widely used in cooling ceilings and cuddly wall technology.
Due to the duo connection, the distributor has double the capacity, but the width of the distributor remains quite compact.
MODTW08-8mm
MODTW10-10,3mm
MODTW12-12mm
Flowmeter-unit MODFM05
For reading and setting the flow in your system.
Actuator-unit MODACBL
For connecting an actuator M30x1.5 with which the system can be controlled.
Without MODZ unit
If you do not need flow meters and actuator connection, this module is available without additions.
Air vent filling unit MODOV07
Module with manual air vent and connection for filling.
Air vent filling unit MODOV07A
Module equipped with an automatic air vent.
Wartel-unit MODW06
Module with gland connection 1"
Wartel-unit MODW07
Module with gland connection 1 1/4"
End piece unit MODP
End piece provided with a ½" female thread if the inner part is removed, creating a possibility for connection for ball valves, etc.
